Operation Manual

Darker1
Works well with light print or faint pencil markings.
Darker2
Darker3
Inserting a Pause
For some telephone systems, it is necessary to dial an access code and listen for a second dial tone. A
pause must be entered in order for the access code to function. For example, enter the access code 9
and then press the Redial/Pause button before entering the telephone number. “-” appears on the
LCD panel to indicate when a pause is entered.
Sending a Fax Automatically
1. Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
See Also:
❏ “Loading an Original Document on the ADF” on page 194
❏ “Loading an Original Document on the Document Glass” on page 195
2. Press the Fax button.
3. Adjust the document resolution to suit your fax needs.
See Also:
❏ “Resolution” on page 196
❏ “Lighten/Darken” on page 197
4. To select a fax number, do one of the followings:
❏ Select Fax to, and then press the
button. Select Phone Book, and then press the
button.
❏ Press the One Touch Dial button, and go to step 6.
Epson AcuLaser CX29 Series User’s Guide
Faxing 198