Operation Manual

4. Select Email to, and then press the button.
5. Select the setting listed below, and then press the
button.
❏ Keypad: Enter the e-mail address directly and then press the
button.
❏ Address Book: Select the e-mail address registered in the E-mail address book, and then press
the
button.
❏ Email Group: Select the e-mail group registered in the E-mail Groups, and then press the
button.
❏ Search Local Address Book: Searches for an e-mail address from the local Address Book.
❏ Search Server Address Book: Searches for an e-mail address on the LDAP server. This
item is displayed when Server Address Book in the System Settings menu is set to
On.
Note:
Users need to be registered in the E-mail address book before you can select Address Book on the
operator panel.
6. Press the Start button to send e-mail.
Adjusting Scanning Options
Adjusting the Default Scan Settings
For a complete list of all of the defaults settings, see “Defaults Settings” on page 273.
Setting the Scanned Image File Type
To specify the file type of the scanned image:
1. Press the System button.
2. Select Defaults Settings, and then press the button.
3. Select Scan Defaults, and then press the
button.
4. Select File Format, and then press the
button.
Epson AcuLaser CX29 Series User’s Guide
Scanning 183