Operation Manual

2
Server Type Select Computer (SMB).
3
Server Address
Enter a server name or IP address of your computer that you have shared out.
The following are examples:
Server name: myhost
IP address: 192.168.1.100
4
Server Port Number
Enter the port number. If you are unsure, you can enter the default value of 139
for SMB.
5
Login Name
Enter the user account name that has access to the shared folder on your
computer.
6
Login Password
Enter the password corresponding to the above login name.
Note:
Empty password is not valid in the Scan to Computer feature. Ensure that you
have a valid password for the user login account. (See “Confirming a Login name
and Password Using SMB” on page 159 for details on how to add a password in
your user login account.)
7
Re-enter Password
Re-enter your password.
8
Share Name
On the Windows operating system, enter the share name of the folder to store
the scanned document on the recipient computer.
On the Mac OS, enter the folder name to store the scanned document on the
recipient computer.
9
Server Path
To store the scanned document in the shared folder directly without creating
any subfolder, leave the space blank.
To store the scanned document in the folder you created under the shared
folder, enter the path as following.
Example: Share Folder name, MyShare, Second-level folder name: MyPic,
Third-level folder name: John
You should now see MyShare\Mypic\John in your directory.
In this case, enter the following item.
Server Path: \MyPic\John
After you configured settings, go to “Sending the Scanned File to the Network” on page 178.
Epson AcuLaser CX29 Series User’s Guide
Scanning 175