Operation Manual

Note:
The illustration may vary for different operating systems.
4. Select Document Feeder or Flatbed in Paper source.
Note:
Select Document Feeder when you want to scan the document loaded in the ADF. Select Flatbed
when you want to scan the document loaded on the document glass.
5. Select your scanning preferences and click Adjust the quality of the scanned picture to display
the Advanced Properties dialog box.
6. Select the desired properties including brightness and contrast, and then click OK.
7. Click Scan to start scanning.
8. Click Save from the File menu.
9. Enter a picture name, and select a file format and destination to save the picture.
Epson AcuLaser CX29 Series User’s Guide
Scanning 157