Operation Manual

Scanning to a Computer
Scanning From the Operator Panel
The following procedure uses Windows XP as an example.
Note:
❏ This feature cannot be used when the printer is connected to a network.
❏ Ensure that the printer is connected to the computer via the USB cable.
1. Load the document(s) face up with top edge in first into the automatic document feeder (ADF).
OR
Place a single document face down on the document glass, and close the document cover.
See Also:
❏ “Making Copies From the ADF” on page 129
❏ “Making Copies From the Document Glass” on page 126
2. Press the Scan button.
3. Select Scan to Computer (USB), and then press the
button.
4. Configure the scanning settings as necessary.
5. Press the Start button.
The selected application window opens on your computer.
Epson AcuLaser CX29 Series User’s Guide
Scanning 153