Operation Manual

4. Press the or button or use the numeric keypad to set the desired value, and then press the
button.
Note:
Values marked by an asterisk (*) are the factory default menu settings.
0.2 inch* (4 mm*)
Specify the value in increments of 0.1 inch (1 mm).
0.0–2.0 inch (0–50 mm)
5. Press the Start button to begin copying.
Margin Middle
To specify the middle margin of the copy.
1. Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
See Also:
❏ “Making Copies From the Document Glass” on page 126
❏ “Making Copies From the ADF” on page 129
2. Press the Copy button.
3. Select Margin Middle, and then press the
button.
4. Press the
or button or use the numeric keypad to set the desired value, and then press the
button.
Note:
Values marked by an asterisk (*) are the factory default menu settings.
0.0 inch* (0 mm*)
Specify the value in increments of 0.1 inch (1 mm).
0.0–2.0 inch (0–50 mm)
Epson AcuLaser CX29 Series User’s Guide
Copying 149