Operation Manual

See Also:

❏ “Making Copies From the Document Glass” on page 126

❏ “Making Copies From the ADF” on page 129

2. Press the Copy button.

3. Select Margin Top/Bottom, and then press the

button.

4. Press the

or button or use the numeric keypad to set the desired value, and then press the

button.

Note:

Values marked by an asterisk (*) are the factory default menu settings.

0.2 inch* (4 mm*)

Specify the value in increments of 0.1 inch (1 mm).

0.0–2.0 inch (0–50 mm)

5. Press the Start button to begin copying.

Margin Left/Right

To specify the left and right margins of the copy.

1. Load the document(s) face up with top edge in first into the ADF.

Place a single document face down on the document glass, and close the document cover.