Operation Manual

Color Saturation
To adjust the amount of colors of the copy to make the colors darker or lighter than the original.
1. Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
See Also:
❏ “Making Copies From the Document Glass” on page 126
❏ “Making Copies From the ADF” on page 129
2. Press the Copy button.
3. Select Color Saturation, and then press the
button.
4. Select the desired setting, and then press the
button.
Note:
Values marked by an asterisk (*) are the factory default menu settings.
Higher
Makes the color of the copy more vivid.
Normal*
The color saturation is the same as the original.
Lower
Makes the color of the copy less vivid.
5. Press the Start button to begin copying.
Auto Exposure
To suppress the background of the original to enhance text on the copy.
1. Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
Epson AcuLaser CX29 Series User’s Guide
Copying 142