Operation Manual

4. Select the desired setting, and then press the button.
Note:
Values marked by an asterisk (*) are the factory default menu settings.
Text
Used for documents with text.
Mixed*
Used for documents with both text and photos.
Photo
Used for documents with photos.
5. Press the Start button to begin copying.
Lighten/Darken
To adjust the contrast to make the copy lighter or darker than the original.
1. Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
See Also:
❏ “Making Copies From the Document Glass” on page 126
❏ “Making Copies From the ADF” on page 129
2. Press the Copy button.
3. Select Lighten/Darken, and then press the
button.
4. Select the desired setting, and then press the
button.
Note:
Values marked by an asterisk (*) are the factory default menu settings.
Lighter3
Works well with dark print.
Lighter2
Lighter1
Epson AcuLaser CX29 Series User’s Guide
Copying 140