Operation Manual

See Also:
“ Setting Copy Options” on page 130.
6. Press the Start button to begin copying.
a When you are using the document glass and it is set to On, the display prompts you for
another page.
If you want to place a new document, press the
button to select Yes, and then press the
button.
Another display prompts you for placing next page.
Replace the document with a new document.
Select Continue, and then press the
button.
Reduce/Enlarge
To reduce or enlarge the size of a copied image, from 25 % to 400 % when you copy original documents
from the document glass or ADF.
Note:
When you make a reduced copy, black lines may appear at the bottom of your copy.
1. Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
See Also:
“Making Copies From the Document Glass” on page 126
“Making Copies From the ADF” on page 129
2. Press the Copy button.
3. Select Reduce/Enlarge, and then press the
button.
4. Select the desired setting, and then press the
button.
Epson AcuLaser CX29 Series User’s Guide
Copying 136