Operation Manual

OR
Place a single document face down on the document glass, and close the document cover.
See Also:
❏ “Making Copies From the Document Glass” on page 126
❏ “Making Copies From the ADF” on page 129
2. Press the Copy button.
3. Press the Color Mode button to switch between Color and Black & White modes.
4. Press the Start button to begin copying.
Paper Supply
To select a tray.
1. Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
See Also:
❏ “Making Copies From the Document Glass” on page 126
❏ “Making Copies From the ADF” on page 129
2. Press the Copy button.
3. Select Paper Supply, and then press the
button.
4. Select the desired setting, and then press the
button.
Note:
Values marked by an asterisk (*) are the factory default menu settings.
Tray 1: xxx*
The paper is fed from Tray 1.
Epson AcuLaser CX29 Series User’s Guide
Copying 131