Operation Manual

[_ ]
Use the buttons on the operator panel to enter the numeric password you specified in the print driver.
The password you entered will be displayed as asterisks (*******) to ensure confidentiality.
If you enter an invalid password, the message “Wrong password Re-enter” appears. Wait three
seconds, or press the
button to return to the screen for user selection.
When you enter a valid password, you have access to all print jobs matching the user name and
password you entered. The print jobs matching the password you entered appear on the screen. You
can then choose to print or to delete jobs matching the password you entered. (See “Printing the Stored
Jobs” on page 105 for more information.)
Deleting Stored Jobs
With Secure Print, a job that has been stored will be deleted after printing if entered on the operator
panel or at turning off the printer.
For Sample Print, these jobs remain stored until you delete them on the operator panel or turn off the
printer.
Direct Print Using the USB Storage Device
The Print from USB Memory feature allows you to print files stored in a USB storage device by
operating from the operator panel.
Important:
❏ To prevent damage to your printer, DO NOT connect any device other than USB storage device to the
USB port of the printer.
❏ DO NOT remove the USB storage device from the USB port until the printer has finished printing.
The USB port of the printer is designed for USB 2.0 devices. You must use only an authorised USB
storage device with an A plug type connector. Use only a metal shielded USB storage device.
* A plug type
Epson AcuLaser CX29 Series User’s Guide
Printing Basics 106