Operation Manual

❏ If a document name is not assigned to your print job in the print driver, the job’s name will be
identified using the printer’s time and date of submission to distinguish it from other jobs you have
stored under your name.
❏ Sample Print is available when you use the PCL driver.
Storing Print Jobs
In the print driver, you can specify a setting that enables you to store print jobs in temporary memory.
For example, select a job type other than Normal Print or Fax in the Paper / Output tab of the PCL 6
driver. The job will be stored in temporary memory until you request to print it from the operator
panel or turn off the printer.
Printing the Stored Jobs
Once jobs are stored, you can use the operator panel to specify printing. Select the job type you are
using from Secure Print and Sample Print. Then, select your user ID from a list. Secure Print requires
the password you specified in the driver when you sent the job.
To print the stored documents, use the procedure below.
1. Press the Print button.
2. Select Secure Print or Sample Print, and then press the
button.
3. Select your user ID, and then press the
button.
4. Select the document you want to print, and then press the
button.
5. Select the desired job type, and then press the
button.
6. Select Use PC Settings or Input Number of Copies, and then press the
button.
Note:
When you select Input Number of Copies, you can specify the number of copies to be printed
before pressing the
button.
The stored document will be printed.
Specifying Your Password on the Operator Panel (Secure Print)
When you select your user ID for Secure Print, the following prompt appears:
Epson AcuLaser CX29 Series User’s Guide
Printing Basics 105