User`s guide

Configuration Menu Overview
43
IEEE802.1X
Setting
DISABLE / ENABLE
Select whether or not to enable
IEEE802.1X.
E-MAIL
SETTING
SMTP
Setting
DISABLE / ENABLE
Select whether to enable or disable
e-mail transmission operations for this
machine.
SENDER NAME
Specify the name of the E-mail sender
(up to 20 characters) used for network
scanning.
The default setting is “EPSON
AL-CX28”.
E-MAIL ADDRESS
Specify the E-mail address (up to 64
characters) of the E-mail sender used
for network scanning.
DEFAULT SUB-
JECT
Specify the subject (up to 20 characters)
of the E-mail message used for network
scanning.
The default setting is “from EPSON
AL-CX28”.
SMTP SERVER
ADDR.
Specify the IP address or host name (up
to 64 characters) for the SMTP server.
The default setting is “0.0.0.0”.
SMTP PORT NO.
Setting
1 to 65535 (Default: 25)
Specify the port number communicating
with the SMTP server.
SMTP TIMEOUT
Setting
30 to 300 sec (Default:
60 sec)
Select the amount of time (in seconds)
until the connection with the SMTP
server times out.
TEXT INSERT
Setting
OFF / ON
Select whether or not the specified text
is inserted into the E-mail message.
Downloaded from ManualsPrinter.com Manuals