User`s guide
Configuration Menu Overview30
LAMP WARMUP TIME
Setting
AUTO / FIX
Specify the warm-up time for the lamp of the
scanner unit.
If
AUTO is selected, the length of time to
recover from Energy Save mode when the
machine is turned on is adjusted according to
the room temperature. Since the machine can-
not be used until its condition is completely sta-
bilized, select this setting, for example, if you
wish to scan at a high image quality from the
first page.
If
FIX is selected, the machine can be used
after lamp warm-up is finished. With a low room
temperature, the quality of the first page of a
copy or scanned image may not be as good as
if AUTO was selected.
TONER EMPTY
Setting
STOP / BW CONTINUE
Select whether or not printing and copying stop
when the toner has run out.
If
STOP is selected, printing and copying stop
when the toner runs out.
If BW CONTINUE is selected, monochrome
printing and monochrome copying can continue
when one or more color toners run out while
black toner still remains.
TONER NEAR EMPTY
Setting
ON / OFF
When the toner is nearly run out, a warning
message appears.
I-UNIT NEAR EMPTY
Setting
ON / OFF
When the imaging unit is nearly run out, warning
message appears.
AUTO CONTINUE
Setting
ON / OFF
Select whether or not printing continues when a
size error occurs during printing.
CALIBRATION
Setting
ON / OFF
Select whether or not to perform image stabili-
zation. If ON is selected, image stabilization is
started.
Downloaded from ManualsPrinter.com Manuals