User`s guide

Status, Error, and Service Messages
263
Service Messages
These messages indicate a more serious fault that can only be corrected by a
customer service engineer. If one of these messages appears, turn the
machine off, then turn it on again. If the problem persists, contact your local
vendor or authorized service provider.
xxx IS DISABLED
The TCP/IP, FTP,
SMTP or SMB set-
tings are disabled.
Enable the TCP/IP,
FTP, SMTP or SMB
settings.
DESTINATION SET
BY MANUAL UP TO 16
There were more
than 16 addresses
found with an LDAP
search.
Increase the number of
entered characters,
and then perform the
search again.
This service message... means... Do this...
MACHINE TROUBLE
SERVICE CALL (xxxx)
An error has been
detected with the item
indicated “xxxx” in
the service message.
Reboot the machine.
This often clears the
service message,
and machine opera-
tion can resume.
If the problem per-
sists, contact Techni-
cal Support.
This message... means... Do this...
Downloaded from ManualsPrinter.com Manuals