User`s guide

Status, Error, and Service Messages260
REMOVE ORIGINAL
IN ADFR
The document is
loaded in the ADF
while a function is
set that requires
scanning from the
original glass.
Place the document on
the original glass.
RESULTS ARE OVER xxx
The LDAP search
results exceed the
maximum specified
with MAX.
SEARCH RESULT
in the LDAP SET-
TING menu.
Change the maximum
setting, or change the
search conditions (for
example, increase the
length of the key-
word), and then try
performing the LDAP
search again.
SCANNER MOTION ERROR
CHECK SCANNER LOCK
The scanner is
locked.
Move the scanner lock
lever to , and then
turn the machine off,
then on again. For
details, refer to
“Unlocking the Scan-
ner” on page 214.
SCANNER UNIT OPEN
CLOSE SCANNER UNIT
The scanner unit is
open.
Close the scanner unit.
SERVER MEMORY FULL
SMTP Server
The memory of the
SMTP server has
become full.
Free up some space
on the disk, for exam-
ple, by contacting your
server administrator.
THE PARTY IS FULL
The maximum num-
ber of 236 destina-
tions for the scan
data has been
reached.
Send the data, and
then try scanning
again. Otherwise,
delete unnecessary
destinations before
adding the desired
ones.
This message... means... Do this...
Downloaded from ManualsPrinter.com Manuals