User`s guide

Scanning With the Machine
175
Editing/Deleting Group Destinations
Information registered with a group destination can be edited or deleted.
1 In the main screen (Scan mode), press the + or , key to select UTIL-
ITY, and then press the Select key.
2 Press the + or , key to select ADDRESS REGISTER, and then press
the Select key.
3 Press the + or , key to select GROUP, and then press the Select key.
4 Use the keypad to type in the number (between 1 and 20) for the group
destination to be edited/deleted, and then press the Select key.
The information currently registered for the group destination appears for
about two seconds.
5 Press the + or , key to select EDIT to edit information or DELETE to
delete the destination, and then press the Select key.
If DELETE was selected, the settings are deleted, and the ADDRESS
REGISTER
menu appears again.
6 If desired, edit the group name, and then press the Select key.
" For details on entering/editing text, refer to “Entering Text” on page
283.
7 Press the + or , key to select ADD to add an address destination,
CHECK/EDIT to delete the destination or FINISH to finish editing, and
then press the Select key.
If FINISH was selected, the edited settings are saved, and the
ADDRESS REGISTER menu appears again. If ADD was selected, con-
tinue with step 6 of “Registering Group Destinations” on page 174. If
CHECK/EDIT was selected, continue with step 8.
8 Press the + or , key to select the address destination to be deleted, and
then press the Stop/Reset key.
" To check the settings for the selected address destination, press
the Select key.
9 Press the + or , key to select Yes, and then press the Select key.
10 After the address destination is deleted, press the Back key.
11 To delete another address destination, repeat the procedure from step 8.
Downloaded from ManualsPrinter.com Manuals