User`s guide
Scanning With the Machine
171
" A maximum of 64 characters can be entered.
Registering Address Destinations (LDAP Search)
E-mail addresses can be registered as address destinations by using infor-
mation on the LDAP server. A maximum of 250 address destinations can be
registered.
" To connect to an LDAP server, settings for LDAP SETTING must be
specified. For details, refer to the Reference Guide on the software
CD-ROM.
" Machine key operations cannot be used to register an FTP address or
SMB address as an address destination. These addresses can be
registered with Web-based EpsonNet config. For details, refer to the
Reference Guide on the software CD-ROM.
" Address destination numbers 221 to 250 are reserved for registering
FTP addresses and SMB address from Web-based EpsonNet config.
1 In the main screen (Scan mode), press the + or , key to select UTIL-
ITY
, and then press the Select key.
2 Press the + or , key to select ADDRESS REGISTER, and then press
the Select key.
3 Press the + or , key to select ADDRESS, and then press the Select key.
4 Use the keypad to type in the number (between 1 and 220) for the
address destination, and then press the Select key.
5 Press the + or , key to select LDAP SEARCH, and then press the
Select key.
" If an LDAP server is not specified, LDAP SEARCH does not
appear.
6 Press the + or , key to select NAME or E-MAIL, and then press the
Select key.
" To search registered names, select NAME. To search e-mail
addresses, select E-MAIL.
7 Use the keypad to type in the search keyword (maximum of 10 charac-
ters), and then press the Select key.
The search begins, and the search results appear after a while. If no data
matches the search keyword,
NOT FOUND appears for about two sec-
onds.
" For details on entering/editing text, refer to “Entering Text” on page
283.
Downloaded from ManualsPrinter.com Manuals