User`s guide

Scanning With the Machine170
5 Press the + or , key to select the address to be deleted from the favorite
list, and then press the Stop/Reset key.
6 Press the + or , key to select YES, and then press the Select key.
The selected address is deleted.
7 To delete another address, repeat the procedure from step 5.
8 To finish deleting addresses, press the Back key.
9 Press the + or , key to select FINISH, and then press the Select key.
Registering Address Destinations (Direct Input)
E-mail addresses can be registered as address destinations. A maximum of
250 address destinations can be registered.
" Machine key operations cannot be used to register an FTP address or
SMB address as an address destination. These addresses can be
registered with Web-based EpsonNet config. For details, refer to the
Reference Guide on the software CD-ROM.
" Address destination numbers 221 to 250 are reserved for registering
FTP addresses and SMB address from Web-based EpsonNet config.
1 In the main screen (Scan mode), press the + or , key to select UTIL-
ITY
, and then press the Select key.
2 Press the + or , key to select ADDRESS REGISTER, and then press
the Select key.
3 Press the + or , key to select ADDRESS, and then press the Select key.
4 Use the keypad to type in the number (between 1 and 220) for the
address destination, and then press the Select key.
5 Press the + or , key to select MANUAL SETTING, and then press the
Select key.
" If an LDAP server is not specified, step 5 is skipped.
6 Use the keypad to type in the registration name, and then press the
Select key.
" For details on entering/editing text, refer to “Entering Text” on page
283.
" A maximum of 20 characters can be entered.
7 Use the keypad to type in the e-mail address, and then press the Select
key.
The settings are registered, and the ADDRESS REGISTER menu
appears again.
Downloaded from ManualsPrinter.com Manuals