User`s guide

Scanning With the Machine168
6 Press the + or , key to select FINISH, and then press the Select key.
Deleting a Specified Destination Address
A specified destination address (e-mail address, FTP address or SMB
address) can be deleted.
" Changes made with this procedure will not be applied to the original
data (address destination, group destination, etc.).
1 In the main screen (Scan mode), press the + or , key to select the cur-
rent data destination setting, and then press the Select key.
2 To delete an e-mail address, press the + or , key to select CHECK/
EDIT
, and then press the Select key. Then, press the + or , key to
select the address to be deleted. To delete an FTP address or SMB
address, continue with step 3.
3 Press the Stop/Reset key.
4 Press the + or , key to select YES, and then press the Select key.
The selected address is deleted.
" If all specified addresses are deleted, the main screen is dis-
played.
5 To delete another address, repeat the procedure from step 2.
6 To finish deleting addresses, press the Back key.
7 Press the + or , key to select FINISH, and then press the Select key.
Registering/Editing Addresses
Addresses can be registered/edited in the favorite list, as address destina-
tions or as group destinations.
" Addresses can also be registered/edited with Web-based EpsonNet
config. For details, refer to the Reference Guide on the software
CD-ROM.
Downloaded from ManualsPrinter.com Manuals