User`s guide

Scanning With the Machine
167
Specifying Multiple Destination Addresses
A destination address can be added if a destination e-mail address is speci-
fied.
" If an FTP address or an SMB address was selected, multiple destina-
tion addresses cannot be specified.
1 In the main screen (Scan mode), press the + or , key to select the cur-
rent data destination setting, and then press the Select key.
2 Press the + or , key to select ADD, and then press the Select key.
3 Specify the destination address.
" For details on typing in an e-mail address, refer to “Directly Enter-
ing the E-mail Address” on page 161.
For details on selecting from the favorite list, refer to “Selecting
From the Favorite List” on page 162.
For details on selecting an address destination, refer to “Selecting
an Address Destination” on page 162.
For details on selecting a group destination, refer to “Selecting a
Group Destination” on page 163.
For details on selecting from the address book, refer to “Selecting
From the Address Book” on page 164.
For details on searching the address book, refer to “Searching the
Address Book” on page 164.
For details on searching an LDAP server, refer to “Searching an
LDAP Server” on page 165.
Editing a Specified Destination Address
A specified destination e-mail address can be edited.
" FTP addresses, SMB addresses and addresses registered as address
destinations or group destinations cannot be edited.
1 In the main screen (Scan mode), press the + or , key to select the cur-
rent data destination setting, and then press the Select key.
2 Press the + or , key to select CHECK/EDIT, and then press the Select
key.
3 Press the + or , key to select the e-mail address to be edited, and then
press the Select key.
4 Use the keypad to edit the e-mail address, and then press the Select key.
" For details on entering/editing text, refer to “Entering Text” on page
283.
5 To finish editing addresses, press the Back key.
Downloaded from ManualsPrinter.com Manuals