User`s guide

Selecting Printer Options/Defaults (for Windows)122
Selecting Printer Options/Defaults
(for Windows)
Before you start working with your machine, you are advised to verify/change
the default driver settings. Also, in case you have options installed, you
should “declare” the options in the driver.
Windows Vista/XP/Server 2003/2000 (PCL6, PS)
1 Choose the driver’s properties as follows:
(Windows Vista)
From the Start menu, click Control Panel, then Hardware and
Sound, and then click Printers to open the Printers directory.
Right-click the EPSON CX28 P6 or EPSON CX28 PS printer icon, and
then click Properties.
(Windows XP/Server 2003)
From the Start menu, choose Printers and Faxes to display the
Printers and Faxes directory. Right-click the EPSON CX28 P6 or
EPSON CX28 PS printer icon and choose Properties.
(Windows 2000)
From the Start menu, choose Settings and then Printers to display
the Printers directory. Right-click the EPSON CX28 P6 or EPSON
CX28 PS printer icon and choose Properties.
2 If you have installed options, proceed with the next step. Otherwise, skip
to step 9.
3 Select the Configure tab.
4 Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 8.
5 Click the Refresh to automatically configure installed options.
" The Refresh is available only if bi-directional communication is
available with the machine; otherwise it is grayed out.
6 From the Device Options list, select an option, one at a time, and then
select Enable or Disable from the Settings menu.
" If Printer Memory is selected, select 256 MB, 512 MB or
768 MB according to the installed memory. The factory default set-
ting is 256 MB.
7 Click Apply.
" Depending on the version of the operating system, Apply may not
appear. If this is the case, continue with the next step.
Downloaded from ManualsPrinter.com Manuals