User`s guide

Paper Handling 43
❏ When loading transparencies in the MP tray, insert the short edge first as shown below.
❏ If transparencies are loaded incorrectly, the message Check Transparency appears in
the LCD panel. Remove the jammed transparencies from the product. To clear the jam,
see "When transparencies are jammed at the MP tray" on page 348.
❏ When using transparencies, load them in the MP tray and set the Paper Type setting to
Transparency in the printer driver.
❏ When the Paper Type setting in the printer driver is set to Transparency, do not load
any other type of paper except transparencies.
c
Caution:
Sheets that have just been printed on may be hot.
EPSON Color Laser Coated Paper
Printing on EPSON Color Laser Coated Paper produces glossier and higher quality
printouts. When loading EPSON Color Laser Coated Paper, you should make paper
settings as shown below:
❏ Make settings on the Basic Settings in the printer driver.
Note:
When printing on the back side of previously printed paper, select Coated (Back).
❏ You can also make these settings on the Setup menu’s Tray Menu on the control panel.
See "Tray Menu" on page 242.
Paper Size: A4
Paper Source: MP Tray (up to 20 mm thick stack)
Paper Type: Coated
Downloaded from ManualsPrinter.com Manuals