User`s guide

Paper Handling 42
Note:
When printing on the back side of previously printed paper, select Semi-Thick (Back).
❏ You can also make these settings on the Setup menu’s Tray Menu on the control panel.
See "Tray Menu" on page 242.
EPSON Color Laser Transparencies
Epson recommends the use of EPSON Color Laser Transparencies.
Note:
Duplex printing is not available for transparencies.
Transparencies can be loaded into the MP tray only. When using transparencies, you
should make paper settings as shown below:
❏ Make settings on the Basic Settings in the printer driver.
❏ You can also make these settings on the Setup menu’s Tray Menu on the control panel.
See "Tray Menu" on page 242.
Please note the following when handling this media:
❏ Hold each sheet by its edges, as oil from your fingers may transfer to the surface and
damage the printable surface of the sheet. The Epson logo appears on the printable
side.
Paper Size: A4
Paper Source: MP Tray (up to 180 sheets or up to 20 mm
thick stack)
Lower Cassette (up to 500 sheets or up to
56 mm thick stack)
Paper Type: Semi-Thick
Paper Size: A4 or LT
Paper Source: MP Tray (up to 75 sheets)
Paper Type: Transparency
Downloaded from ManualsPrinter.com Manuals