User`s guide

Information about Fonts 387
You can print samples of the fonts available in each mode by using the control panel’s
Information Menu. Follow these steps to print font samples.
1. Make sure that paper is loaded.
2. Make sure the LCD panel displays Ready or Standby, then press the Enter button.
3. Press the d Down button to select the font sample for the appropriate mode.
4. Press the Enter button to print the selected font sample sheet.
Adding more fonts
You can add a wide variety of fonts to your computer. Most font packages include an
installer for this purpose.
See your computer documentation for instructions on installing fonts.
Selecting fonts
Whenever possible select fonts in your application. See your software documentation for
instructions.
If you are sending unformatted text to the printer directly from DOS or if you are using a
simple software package that does not include font selection, you can select fonts using
the product’s control panel menus when in the LJ4, ESC/P 2, FX, or I239X emulation
mode.
Downloading fonts
Fonts that reside on your computer’s hard disk can be downloaded, or transferred, to the
printer so they can be printed. Downloaded fonts, also called soft fonts, remain in printer
memory until you turn off the product or otherwise reset it. If you plan on downloading many
fonts, make sure your printer has sufficient memory.
Most font packages make it easy to manage fonts by providing their own installer. The
installer gives you the option of having the fonts automatically downloaded whenever you
start your computer or having fonts downloaded only when you need to print a particular
font.
EPSON Screen Fonts (Windows Only)
New :confirm the specification/ If unnecessary, delete (Windows Only) from the title
Downloaded from ManualsPrinter.com Manuals