User`s guide

Information about Fonts 381
❏ The following 4 kinds of the properties are supported as the Application Identifier (AI).
01: Global traded item number
10: Batch / Lot number
17: Expiry date
30: Quantity
❏ The height of the bar code is automatically adjusted to 15% or more of its total length,
in conformance to the Code128 standard. For this reason, it is important to keep at least
one space between the bar code and the surrounding text to prevent overlapping.
❏ Some applications automatically delete the spaces at the end of lines or change
multiple spaces into tabs. Bar codes containing spaces may not be correctly printed
from applications that automatically delete spaces from the ends of lines or change
multiple spaces into tabs.
❏ When printing two or more bar codes on one line, separate the bar codes with a tab, or
select a font other than a BarCode Font and input the space. If a space is input while
EAN128 is selected, the bar code will not be correct.
The following codes are inserted automatically and need not be input by hand:
❏ Left/Right quiet zone
❏ Start/Stop character
❏ FNC1 character
It inserts for discernment from Code128 and for a pause of the variable length
application identifier.
❏ Check digit
❏ Change code set character
Print sample
Character type Alphanumeric characters (A to Z, 0 to 9)
Parenthesis are only for identification of the Application Identifier (AI)
Only the capital letters are supported by the small letter key input.
Number of characters It changes with the Application Identifier (AI).
01: 4 characters "(01)" and 13 numbers
17: 4 characters "(17)" and 6 numbers
10: 4 characters "(10)" and maximum of 20 alphanumeric characters
30: 4 characters "(30)" and maximum of 8 numbers
Font size 36 pt or more
Recommended sizes are 36 pt, 72 pt
Downloaded from ManualsPrinter.com Manuals