User`s guide

Information about Fonts 378
❏ When printing two or more bar codes on one line, separate the bar codes with a tab, or
select a font other than a BarCode Font and input the space. If a space is input while
Code128 is selected, the bar code will not be correct.
The following codes are inserted automatically and need not be input by hand:
❏ Left/Right quiet zone
❏ Start/Stop character
❏ Check digit
❏ Change code set character
Print sample
EPSON ITF
❏ The EPSON ITF fonts conform to the USS Interleaved 2-of-5 standard (American).
❏ Four EPSON ITF fonts are available, allowing you to enable and disable the automatic
insertion of check digits and OCR-B.
❏ The height of the bar code is automatically adjusted to 15% or more of its total length,
in conformance to the Interleaved 2-of-5 standard. For this reason, it is important to
keep at least one space between the bar code and the surrounding text to prevent
overlapping.
❏ Interleaved 2 of 5 treats every two characters as one set. When there are an odd
number of characters, EPSON ITF fonts automatically add a zero to the beginning of
the character string.
Character type All ASCII characters (95 in total)
Number of characters No limit
Font size 26 pt to 104 pt (up to 96 pt in Windows XP/2000/Server 2003).
Recommended sizes are 26 pt, 52 pt, 78 pt, and 104 pt.
EPSON Code128
Character type Numbers (0 to 9)
Downloaded from ManualsPrinter.com Manuals