User`s guide

Paper Handling 36
Auto selection
❏ For Windows:
Access the printer driver, click the Basic Settings tab, and select Auto Selection as
the paper source. Then click OK.
❏ For Macintosh:
Access the printer driver, select Printer Settings from the drop-down list and click the
Basic Settings tab. Then, select Auto Selection as the paper source and click OK.
The product will search for a paper source containing the specified paper size in the
following order.
Standard configuration:
MP tray
With optional paper cassette unit installed:
MP tray
Lower Cassette
Note:
❏ Paper other than A4 or Letter size can be fed only from the MP tray.
❏ If you make paper size settings or paper source settings in your application, these settings may
override the printer driver settings.
❏ If you select an envelope for the Paper Size setting, it can be fed only from the MP tray
regardless of the Paper Source setting.
❏ You can change the priority of the MP tray by using the MP Tray setting in the Setup menu. For
details, see "Setup Menu" on page 244.
Loading Paper
This section describes how to load paper. If you use special media such as transparencies
or envelopes, see also "Printing on Special Media" on page 41.
MP tray
Follow the steps below to load paper.
Downloaded from ManualsPrinter.com Manuals