User`s guide

Other Problems 354
Checking printer software in Windows Me or 98
If you canceled the plug-and-play driver installation in Windows Me or 98 before the
procedure was complete, the USB printer device driver or the printer software may be
incorrectly installed. Follow the directions below to ensure that the driver and printer
software are installed correctly.
Note:
The screen shots shown in this section are taken from Windows 98. Windows Me screens may
differ slightly.
1. Access the printer driver, see "Accessing the printer driver" on page 48, then click the
Details tab.
If EPUSBX: (EPSON AcuLaser CXXX) is displayed in the “Print to the following port”
list, then the USB printer device driver and printer software are installed correctly. If the
correct port is not displayed, proceed to the next step.
2. Right-click the My Computer icon on your desktop, then click Properties.
3. Click the Device Manager tab.
Downloaded from ManualsPrinter.com Manuals