User`s guide

Printing Problems 306
Printing in the PCL6/5 Mode Problems
The problems listed in this section are those that you may encounter when printing in the
PCL6 mode. All procedural instructions, refer to the PCL6 printer driver.
The printer does not print
The printer does not print correctly in the PCL mode
The font on the printout is different from that on the screen
The edges of texts and/or images are not smooth
Cause What to do
The Print to file check box is selected in the
Print dialog box.
Clear the Print to file check box in the Print dialog box.
Cause What to do
(PCL5c mode only) Graphics Mode may
be set to HP-GL/2 and the printing data
may include the data that cannot be
printed in the setting.
Access the printer driver, click the General tab, click
Options, then select Raster as Graphics Mode.
Image Optimum may be set to Auto or On
and the printing data may include the
data that cannot be printed in the setting.
Access the Printing Menu on your printer's control
panel, then set Image Optimum to Off.
Cause What to do
The EPSON screen fonts are not installed. The screen fonts must be installed on the computer that
you are using. Otherwise, the font that you select is
substituted by some other font for display on the
screen.
Cause What to do
The resolution is set to Fast (300 dpi). Access the printer driver, click the Print Quality tab,
then select Fine (600 dpi) as the resolution.
The printer does not have sufficient
memory.
Increase the printer memory.
Downloaded from ManualsPrinter.com Manuals