User`s guide

Printing Problems 302
The non-printed side of the page is dirty
Memory Problems
Print quality decreased
Insufficient memory for current task
Insufficient memory to print all copies
There may be a problem with the
photoconductor unit.
Replace the photoconductor unit. See
"Photoconductor Unit" on page 281.
The print head is dirty. See "Cleaning the print head" on page 288 and
clean the print head.
Cause What to do
Toner may have spilled onto the paper feed
path.
Clean internal product components by printing
three pages with only one character per page.
Cause What to do
The product cannot print at the required
quality level because of insufficient memory,
and the product lowers the quality
automatically so that the product can
continue printing.
Check to see if the printout is acceptable.
If not, add more memory for a permanent solution or
lower print quality temporarily in the printer driver.
Cause What to do
The product has insufficient memory for
current task.
Add more memory for a permanent solution or lower
print quality temporarily in the printer driver.
Cause What to do
The product does not have sufficient memory
to collate print jobs.
Only one set of copies will be printed. Reduce the
contents of print jobs, or add more memory. For
information on installing more memory, see "Memory
Module" on page 273.
Downloaded from ManualsPrinter.com Manuals