User`s guide

Cleaning and Transporting the Product 293
❏ Place the product where you can easily unplug the power cord.
❏ Keep the entire computer and product system away from potential sources of
interference, such as loudspeakers or the base units of cordless telephones.
❏ Avoid using an electrical outlet that is controlled by wall switches or automatic timers.
Accidental disruption of power can erase valuable information in your computer’s and
product’s memory.
c
Caution:
❏ Leave adequate room around the product to allow for sufficient ventilation.
❏ Avoid locations that are subject to direct sunlight, excessive heat, moisture, or dust.
❏ Avoid using outlets that other appliances are plugged into.
❏ Use a grounded outlet that matches the product’s power plug. Do not use an adapter
plug.
❏ Only use an outlet that meets the power requirements for this product.
For long distances
If you need to transport your product for long distances, carefully repack it using the original
box and packing originals.
Follow the steps below to repack your product.
1. Set the scanner’s carriage to the carriage lock position using the control panel. To do
so, press the Setup button, select Scan Settings, and then select Carriage Lock.
2. Set the transportation lock on the left side of the document table is set in the locked
position. See "Scanner parts" on page 26.
Downloaded from ManualsPrinter.com Manuals