User`s guide

Replacing Consumable Products 281
Note:
The toner cartridge is installed securely when the right lever cannot be turned any further. Make
sure that the toner cartridge is installed securely.
9. Close cover A.
10.Confirm the error message in the LCD panel. When another toner cartridge needs to be
replaced, an error message is displayed. Repeat steps 2 to 9 to replace the cartridge.
Photoconductor Unit
Handling precautions
Always observe the following handling precautions when replacing the consumable
products:
❏ The photoconductor unit weighs 2.8kg (6.16 lb). Be sure to hold it firmly by the handle
when carrying it.
❏ When replacing the photoconductor unit, avoid exposing it to light any longer than
necessary.
❏ Be careful not to scratch the surface of the drum and belt. Also, avoid touching the
drum, since oil from your skin may permanently damage its surface and affect print
quality.
❏ To get the best print quality, do not store the photoconductor unit in an area subject to
direct sunlight, dust, salty air, or corrosive gases (such as ammonia). Avoid locations
subject to extreme or rapid changes in temperature or humidity.
❏ Do not tilt the photoconductor unit.
Downloaded from ManualsPrinter.com Manuals