User`s guide

Getting to Know Your Product 28
e. l Left/ r Right button Use these buttons to sequentially display previous or next setting
values. The r Right button is also used as the OK button to set
and register a setting item. Also, the l Left button can be used
to move the cursor one character left and overwrite mistakenly
entered data.
u Up/ d Down button Use these buttons to sequentially display previous or next menu
items. For instructions on how to use these buttons, see "Using the
Setup Menu" on page 238.
f. Advanced/Menu button Use this button to display the advanced menu for each mode.
g. Speed dial button
(fax model only)
Use this button to display a list of registered recipients in the LCD
panel.
h. Pause/Redial button
(fax model only)
Use this button to insert a pause into fax dialing, or redial to the
same fax number called previously.
i. x B&W Start button,
x Color Start button
Use these buttons to start a black-and-white or color copy,
scan, or fax transmission.
When the error light is flashing, pressing this button clears the
error and switches the product to ready status.
j. y Cancel button Use this button to stop scanning operation, or cancel copy, fax
transmission and print job.
Pressing it once cancels the current job.
Pressing and holding it for more than three seconds in Print
mode deletes all print jobs from the product memory.
k. Numeric keypad Used to enter the number of copies or a zoom value in Copy
mode. Also, enters numeric values, such as the Time Setting
used in fax communications, in Setup mode.
hash and * asterisk buttons can be used in Fax mode.
l. Reset button Use this button to reset the selected setting item or mistakenly
entered values to the default value. Press and hold it for more
than three seconds to delete all setting items to their default
values. Also, used as a delete button to delete one character
from the entered data when entering a recipient fax number in
Fax mode.
m. Setup light On when the product is in Setup mode.
n. Setup button Use this button to switch to the Setup mode.
o. Mode buttons Use these buttons to switch to the corresponding mode.
p. Mode lights On when the corresponding mode (Print, Copy, Fax, or Scan) is
selected. When the Print light is on, the product is in Print mode
and ready to receive and print data.
Downloaded from ManualsPrinter.com Manuals