User`s guide

Installing Options 275

5. Reattach the option cover with the screw as shown below.

6. Reconnect the interface cable and power cord, and turn the product on.

Note for Windows users:

If EPSON Status Monitor is not installed, you have to make settings manually in the printer

driver. See "Making Optional Settings" on page 64.

7. To confirm that the option is installed correctly, print a status sheet. See "Printing a

Status Sheet" on page 356.

Note for Macintosh users:

When you have attached or removed product options, you need to delete the product using

Print Setup Utility (for Mac OS X 10.3) or Print Center (for Mac OS X 10.2), and then

re-register the product.

Removing a memory module

Caution:

Before you remove a memory module, be sure to discharge any static electricity by touching

a grounded piece of metal. Otherwise, you may damage static-sensitive components.

Downloaded from ManualsPrinter.com Manuals