User`s guide

Installing Options 274
3. Identify the expansion memory slot (s).
* Expansion memory slots (slot 2 and slot 3)
c
Caution:
Do not remove the memory module installed into slot 1, which is used for the system.
Note:
When adding an expansion memory module, normally install it into slot 3. However, when you
increase memory using two expansion memory slots (slot 2 and slot 3), you have to remove the
original 64 MB DIMM from slot 2 first, and then install two optional DIMMs.
4. Insert the memory module into slot until the clip locks onto the memory module. Make
sure that the upper slot (white) has a module at all times.
c
Caution:
❏ Do not force the memory module into the slot.
❏ Be sure to insert the memory module facing the correct way.
❏ You should not remove any modules from the circuit board. Otherwise, the product
will not work.
*
Downloaded from ManualsPrinter.com Manuals