User`s guide

Installing Options 270
1. Turn the product off and unplug the power cord and interface cable.
2. Take the optional paper cassette unit out of the cardboard box, then remove the
protective originals in the cassette.
3. Place the optional paper cassette unit where you intend to set up the product. Then, put
the product onto the optional paper cassette unit. Align each of the product’s corners
with those of the unit, then lower the product until it rests securely on the unit.
a. hole
b. projection
w
Warning:
Use much care since the rear side of the product is heaver. Two people should lift the
product by the correct positions.
Note:
The product and optional paper cassette unit are heavy so it is necessary to carry them
separately when you transfer them.
b
a
Downloaded from ManualsPrinter.com Manuals