User`s guide

Using the Control Panel 266
An error occurred when you set the transportation lock to the locked position. To clear
the error message on the LCD panel, set the transportation lock to the unlocked
position, and then turn on the product again or press the x B&W Start or x Color Start
button to restart the scanning job.
Scanner Cover Open
The ADF cover is opened.
Scanner error
An error occurred in the scanner unit. Turn off the product, and then turn it on again several
minutes later. If the error occurs again, contact your dealer or a qualified customer support
person for assistance.
Fax error messages
Cannot Fax cause of Power Off Report
An error occurs if you perform fax transmission when a power off report cannot be printed
after turning on the product.
Cannot Send when Receiving
An error occurs when you perform fax transmission while receiving a fax.
Fax Communication Error
A fax communication error occurred during transmission due to some cause.
Fax Error
An error occurred in the fax unit. Turn off the product, wait several minutes and then turn it
on again. If the error occurs again, contact your dealer or a qualified customer support
person for assistance.
Need More Memory
Unable to perform fax transmissions or receptions due to insufficient memory in the
product. Wait until the fax jobs stored in the memory are finished, and then try
transmission/reception again.
No Report Print Info.
This message appears when you specify printing a report or list that does not exist in the
Printing Report menu in Fax mode.
Downloaded from ManualsPrinter.com Manuals