User`s guide

Using the Control Panel 265
The product is unable to write data to the ROM module correctly. You cannot remove the
ROM P because the ROM P is a program ROM module. Contact your dealer.
Writing ROM P
The product is writing data into the ROM module in the ROM slot P.
Wrong Photoconductor
An inappropriate photoconductor unit is installed. Install only the photoconductor unit listed
in "Consumable products" on page 29.
See "Photoconductor Unit" on page 281 for instructions on replacing the photoconductor
unit.
Wrong Toner uuuu
An inappropriate toner cartridge is installed. Install only the toner cartridge listed in
"Consumable products" on page 29.
See "Toner Cartridge" on page 278 for instructions on replacing the toner cartridge. Cyan
(C), Magenta (M), Yellow (Y), or Black (K) appear in place of uuuu.
wwww Open
The specified cover (wwww) does not close securely. Open the cover once, then close it.
Scanner error messages
ADF jam
A paper jam occurred at the Auto Document Feeder. This error also occurs when the
product is turned off during a scan job.
Net connection failed
Unable to normally connect to a computer on the network in Scan mode. The product is not
connected with the computer, or Event Manager is not installed on the computer.
PC connection failed
Unable to normally connect to a computer via USB interface in Scan mode. The product is
not connected with the computer or Event Manager is not installed on the computer.
Release Carriage Lock
Downloaded from ManualsPrinter.com Manuals