User`s guide

Using the Control Panel 264
The product is currently in power-save mode. This mode is canceled when the product
receives job data or the Reset button is pressed.
Toner Cart Error uuuu
A read/write error has occurred for the indicated toner cartridges. Cyan (C), Magenta (M),
Yellow (Y), or Black (K) appear in place of uuuu. Remove the toner cartridges and reinsert
them. If that fails to clear the error, replace the toner cartridges.
To install the indicated cartridges. See "Toner Cartridge" on page 278.
Unable Clear Error
The product cannot clear an error message because the error status still remains. Try
solving the problem again.
uuuu Toner Low
This message indicates that the toner cartridge for the indicated color is near the end of its
service life. Cyan (C), Magenta (M), Yellow (Y), or Black (K) appear in place of uuuu.
Prepare a new toner cartridge.
Warming Up
The product is warming up so that printing, copying, faxing, or scanning can be done.
Worn Fuser
This message indicates that the fuser unit has reached the end of its service life. Prepare
a new fuser unit.
Worn Photoconductor
This message indicates that the photoconductor unit has reached the end of its service life.
Printing after this message appears is not guaranteed. Turn the product off, then replace
the photoconductor unit with a new one. See "Photoconductor Unit" on page 281 for
instructions. The error clears automatically after you replace the unit and close the printer
covers.
Worn uuuu Dev Unit
The developer unit for the indicated color has reached the end of its service life. Cyan (C),
Magenta (M), Yellow (Y), or Black (K) appear in place of uuuu. You can print after this
message appears, but it is recommended to replace the developer unit. Contact your
dealer and prepare a new developer unit.
Write Error ROM P
Downloaded from ManualsPrinter.com Manuals