User`s guide

Using the Control Panel 260
Invalid Data
The spool file on the driver is deleted while printing or the data is abnormal. Press the
x B&W Start or x Color Start button to clear the error.
Invalid N/W Module
There is no network program, or the network program cannot be used with your product.
Contact a qualified service representative.
Irregular Density
The density of the print data is too high to print. Turn off the product and remove jammed
paper.
Manual Duplex
Printer stops because the printing on one side of the paper is finished in the manual duplex
mode. Reload the paper that has been printed on one side into the MP tray and press the
x B&W Start or x Color Start button.
Manual Feed ssss
The manual feed mode is specified for the current print job. Make sure the paper size
indicated by ssss is loaded, then press the x B&W Start or x Color Start button.
Need More Memory
The product has insufficient memory to execute the current task. Press the x B&W Start or
x Color Start button on the control panel to resume printing, or press the y Cancel button
to cancel the print job.
NonGenuine Toner
The installed toner cartridge is not an genuine Epson toner cartridge. Using a non-genuine
toner cartridge may affect print quality. Epson shall not be liable for any damages or
problems arising from the use of consumable products not manufactured or approved by
Epson. Installing a genuine toner cartridge is recommended. Press the x B&W Start or
x Color Start button on the control panel to resume printing.
NonGenuine Toner uuuu
The installed toner cartridge is not a genuine Epson product. Cyan (C), Magenta (M),
Yellow (Y), or Black (K) appear in place of uuuu. Installing a genuine toner cartridge is
recommended. Using a non-genuine toner cartridge may affect print quality. Epson shall
not be liable for any damages or problems arising from the use of consumable products not
manufactured or approved by Epson.
Downloaded from ManualsPrinter.com Manuals