User`s guide

Using the Control Panel 258
Status and Error Messages
This section contains a list of error messages shown in the LCD panel. They give a brief
description of each message and suggestions for correcting the problem. Note that not
every message shown in the LCD panel indicates a problem. When the mark is
displayed at the left of the warning message, multiple warnings have occurred.
Printer error messages
Calibrating Printer
The product automatically calibrates itself. This is not an error message, and will clear itself
after about one minute or more depending on the status of the product. While the product
displays this message, do not open the covers or turn off the product.
Cancel All Print Job
The product is canceling all print jobs in the product memory, including jobs the product is
currently receiving or printing. This message appears when the y Cancel button has been
pressed down for more than three seconds.
Cancel Print Job
The product is canceling the current print job. This message appears when the y Cancel
button has been pressed and released within three seconds.
Can’t Print
The print data is deleted because it is incorrect.
Make sure that the appropriate printer driver is being used.
Check Transparency
You have loaded media other than transparencies when the paper type settings in the
printer driver is Transparency, or transparencies are loaded when the paper settings in
the printer driver is not set to Transparency. Paper is jammed at the MP tray.
To clear the jam, see "When transparencies are jammed at the MP tray" on page 348.
Check Paper Size
The paper size setting is different from the size of paper loaded in the product. Check to
see if the correct size of paper is loaded in the specified paper source.
Downloaded from ManualsPrinter.com Manuals