User`s guide

Using the Control Panel 252
Determines the amount of memory to be used for receiving data and printing data. If
Maximum is selected, more memory is allocated for receiving data. If set to Minimum is
selected, more memory is allocated for printing data.
Note:
❏ To activate Buffer Size settings, you must turn off the printer for more than five seconds then
turn it back on. Or, you can perform a Reset All operation, as explained in Reset Menu.
❏ Resetting the printer erases all print jobs. Make sure the Ready light is not flashing when you
reset the printer.
Network Menu
See the Network Guide for each setting.
Basic Settings
This menu allows you to specify the basic settings for the fax mode.
*1
This item is only available in Germany and France.
*2
Name can be registered only with EPSON Speed Dial Utility.
*3
Default value is determined according to the country/area setting.
Note:
Press the * asterisk button on the numeric keypad when you want to enter a + mark in a Personal
Number. Also, press the # button on the numeric keypad when you want to enter a space.
Transmission Settings
This menu allows you to specify the transmission settings for the fax mode.
Item Settings
Line Type PSTN, PBX, FlashStart
*1
Dial Type Tone, 10 pps, 20 pps
Personal Number Name
*2
: up to 32 characters
Number: up to 20 digits
Speaker Volume Off, 1, 2, 3
Country/Area Setting Austria, Belgium, Denmark, Finland, France, Germany, Greece,
Holland, Ireland, Italy, Luxemburg, Portugal, Spain, Sweden, U.K.,
Poland, Czech, Hungary, Switzerland, Norway
Report Print Setup
*3
English, French, German, Italian, Spanish, Swedish, Danish, Dutch,
Finnish, Portuguese, Simplified Chinese, Traditional Chinese, Korean
Downloaded from ManualsPrinter.com Manuals