User`s guide

Using the Control Panel 250
*
Available only when connected via Network interface.
Error Sheet
When you select On, the printer prints out an error sheet when an error occurs in the PS3
mode or when the PDF file you tried to print is not a supported version.
Coloration
Allows you to select the color printing or black-and-white printing mode.
Image Protect
The printer employs lossy compression when Off is selected. The printer does not employ
lossy compression when On is selected. Lossy compression refers to a data compression
technique in which some amount of data is lost.
Binary
Specifies the data format. Select On for the Binary data and select Off for the ASCII data.
When you select On, PDF formatted files which are transferred via network interface can be
printed directly.
Note:
❏ Binary can only be used with network connection.
❏ You do not have to select On when using AppleTalk.
To use the Binary data, make sure your application supports Binary data and that SEND
CTRL-D Before Each Job and SEND CTRL-D After Each Job are set to No.
When this setting is set to On, you cannot use TBCP (Tagged binary communication
protocol) in the printer driver settings.
Text Detection
When you select On, the text file is converted to a PostScript file when printing. This setting
is available only when you select PS3 in the Emulation Menu.
Item Settings
Error Sheet Off, On
Coloration Color, Mono
Image Protect Off, On
Binary
*
Off, On
Text Detection Off, On
Downloaded from ManualsPrinter.com Manuals