User`s guide

Using the Control Panel 243
Emulation Menu
Use this menu to select the printer emulation mode. You can specify different emulations
for each interface; in other words, for each computer you connect the printer to. The
settings you can choose from are the same for every interface.
Printing Menu
This menu allows you to make standard print settings, such as Page Size and Orientation,
when printing from an application or operating system that does not support your printer
driver. Be sure to use the printer driver to make these settings whenever you can, since
settings made on your computer always override these settings.
*1
Default setting varies according to the country of purchase.
*2
Custom-size paper is 90.0 × 110.0 mm at the minimum and 220 × 355.6 mm at the maximum, but EPSON
recommends printing on paper that is not wider than 215.9 mm.
*3
Not available in PS3 mode.
Page Size
Specifies the paper size.
Wide A4
Selecting On decreases the left and right margins from 4 mm to 3.4 mm.
Item Settings
USB Auto, PS3, PCL
Network Auto, PS3, PCL
Item Settings
Page Size A4
*1
, A5, B5, LT
*1
, HLT, LGL, GLT, GLG, EXE, F4, MON, C10, DL, C5, C6, IB5,
CTM
*2
Wide A4
*3
Off, On
Orientation Port, Land
Resolution 300, 600
RITech On, Off
Toner Save Off, On
Image Optimum
*3
Auto, Off, On
Top Offset -99.0 ... 0.0 ... 99.0 mm in 0.5 increments
LeftOffset -99.0 ... 0.0 ... 99.0 mm in 0.5 increments
Downloaded from ManualsPrinter.com Manuals