User`s guide

Faxing (Fax Model Only) 222
Fax communication setup settings
You can specify the following settings for fax communication reports.
Follow the steps below to change the report settings.
1. Press the Setup button on the control panel.
The Setup light is lit and the Setup menu appears in the LCD panel.
2. Press the d Down button twice to select Fax Settings, then press the r Right button.
The Fax Settings menu appears.
3. Press the u Up or d Down button several times until CommunicationSetup appears,
then press the r Right button.
The Communication Setup menu appears.
4. Press the u Up or d Down button to select your desired report, then press the r Right
button.
Type of report Description and setting items
Activity Report This report contains transmission and reception information. You can
specify whether to automatically print every 50 transmissions or to not
automatically print them.
On Prints this report automatically for every 50
transmissions.
Off Does not print this report automatically.
Transmission Report This report contains transmission information such as Start Time, number
of pages, and transmission result. You can specify when printing this
report.
On Prints this report automatically each time fax
transmission occurs.
Error Only Prints this report automatically only when an error
occurs.
Off Does not print this report.
Multiple Trans Report This report contains transmission information for multiple transmissions.
You can specify when printing this report.
On Prints this report automatically each time multiple
fax transmission using group dial occurs.
Error Only Prints this report automatically only when an error
occurs.
Off Does not print this report.
Downloaded from ManualsPrinter.com Manuals