User`s guide

Faxing (Fax Model Only) 220
Note:
❏ Page numbers will not be printed when performing a manual transmission.
❏ Part of the document may be lost since the above information overwrites the document data.
1. Press the Setup button on the control panel.
The Setup light is lit and the Setup menu appears in the LCD panel.
2. Press the d Down button twice to select Fax Settings, then press the r Right button.
The Fax Settings menu appears.
3. Press the d Down button to select Transmssn Settings, then press the r Right button.
4. Press the d Down button to select Print Sender Info, then press the r Right button.
5. Press the u Up or d Down button to select On, then press the r Right button.
6. To exit the settings, press the l Left button several times or another mode’s button.
Changing incoming faxes settings
You can set the following items for receiving faxes in Reception Settings.
1. Press the Setup button on the control panel.
The Setup light is lit and the Setup menu appears in the LCD panel.
2. Press the d Down button twice to select Fax Settings, then press the r Right button.
The Fax Settings menu appears.
Setting Note
On Prints the sender information
Off Does not print the sender information
Reception Settings menu Setting items
Paper Cassette Auto, MP, LC
Incoming Mode Auto switching, Fax only,
Phone only, TAM
Attached Phone Timeout 1 to 99
Fit to page On, Off
Downloaded from ManualsPrinter.com Manuals