User`s guide

Faxing (Fax Model Only) 214
In the list above, a shaded area indicates the printable area and a vertical line in the
shaded area indicates the location of the header information (head of the original).
*1
Divided: Received image is output on 2 pages.
*2
Rotated: Received image is rotated.
*3
Reduced: Received image is reduced in the sub-scan direction only.
*4
Trimmed on both ends: Both ends of the received image are trimmed.
Note:
When paper is loaded in both the MP tray and the optional paper cassette, paper in the optional
paper cassette is printed.
Basics of receiving faxes
When the product has an attached phone, you can select from four reception modes for
receiving a call. The default is set to the Fax only mode.
To change the reception mode, follow the steps below.
1. Press the Setup button on the control panel.
Setting item Description
Auto switching The call is received by the attached
phone and the product automatically
answers after the phone rings for a
certain duration specified by the
Attached Phone Timeout setting.
Fax only The product automatically answers
and receives the fax. The phone rings
at least one time.
Phone only The call is received by the attached
phone. Fax reception is not
performed.
TAM When an attached phone detects a
fax/phone signal while answering an
incoming call, the product
automatically receives the fax.
Downloaded from ManualsPrinter.com Manuals