User`s guide

Copying 205
4. Press the d Down button to select 2 Pages per Sheet, and then press the r Right
button.
5. Specify the desired copy settings as necessary. For details, see "Making Changes to
Copy Settings" on page 199.
6. Press the x B&W Start or x Color Start button to start copying.
To make a black-and-white copy, press the x B&W Start button. To make a color copy,
press the x Color Start button.
Using the document table
Set the documents one by one. When you press the x B&W Start or x Color Start button,
messages prompting you to set the next document and to confirm whether there are more
documents or not are displayed in the LCD panel.
Using the Auto Document Feeder
When you set all documents in the Auto Document Feeder and press the x B&W Start or
x Color Start button, the documents are fed automatically, and then scanning starts. If you
set an odd number of sheets in the Auto Document Feeder, a half of the last page is output
blank.
Reset the copy settings
The currently selected setting can be reset to the default value by pressing the Reset
button. Pressing the Reset button for a while resets all setting values to the default and
the LCD panel returns to the initial display.
Reset the copy settings in the LCD panel
To reset all settings you made to the factory settings, follow the steps below.
1. Press the Setup button on the control panel.
The Setup light is on and the Setup menu appears in the LCD panel.
2. Press the d Down button until Copy Settings appears, and then press the r Right
button.
3. Press the d Down button to select Copy Factory Settings, and then press the r Right
button.
4. Make sure that Copy Factory Settings is selected, and then press the r Right button.
Downloaded from ManualsPrinter.com Manuals